Li, H. & Zhang, W. Perovskite tandem solar cells: from fundamentals to commercial deployment. Chem. Rev. 120, 9835–9950 (2020).
Wu, W. et al. Stable and uniform self-assembled organic diradical molecules for perovskite photovoltaics. Science 389, 195–199 (2025).
Jia, L. et al. Efficient perovskite/silicon tandem with asymmetric self-assembly molecule. Nature 644, 912–919 (2025).
Wang, Y. et al. Homogenized contact in all-perovskite tandems using tailored 2D perovskite. Nature 635, 867–873 (2024).
Fu, S. et al. Piracetam shapes wide-bandgap perovskite crystals for scalable perovskite tandems. Nat. Nanotechnol. 20, 764–771 (2025).
Yang, X. et al. Understanding and manipulating the crystallization of Sn-Pb perovskites for efficient all-perovskite tandem solar cells. Nat. Photonics 19, 426–433 (2025).
Ying, Z. et al. Antisolvent seeding of self-assembled monolayers for flexible monolithic perovskite/Cu(In,Ga)Se2 tandem solar cells. Nat. Energy 10, 737–749 (2025).
Tian, L. et al. Divalent cation replacement strategy stabilizes wide-bandgap perovskite for Cu(In,Ga)Se2 tandem solar cells. Nat. Photonics 19, 479–485 (2025).
Pei, F. et al. Inhibiting defect passivation failure in perovskite for perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells with certified efficiency 27.35%. Nat. Energy 10, 824–835 (2025).
Zhang, J. et al. Highly efficient narrow bandgap Cu(In,Ga)Se2 solar cells with enhanced open circuit voltage for tandem application. Nat. Commun. 15, 10365 (2024).
Zeng, L. et al. A review of perovskite/copper indium gallium selenide tandem solar cells. Solar RRL 8, 2301059 (2024).
Han, Q. et al. High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells. Science 361, 904–908 (2018).
Jošt, M. et al. 21.6%-efficient monolithic perovskite/Cu(In,Ga)Se2 tandem solar cells with thin conformal hole transport layers for integration on rough bottom cell surfaces. ACS Energy Lett. 4, 583–590 (2019).
Al-Ashouri, A. et al. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells. Energy Environ. Sci. 12, 3356–3369 (2019).
Jin, Y. et al. Recrystallizing sputtered NiOX for improved hole extraction in perovskite/silicon tandem solar cells. Adv. Energy Mater. 15, 2403911 (2025).
Zhang, L. et al. Reducing defects: a review of preparation, doping and surface modification of nickel oxide. Coord. Chem. Rev. 534, 216563 (2025).
Kafedjiska, I. et al. Integration of rough RTP absorbers into CIGS-perovskite monolithic tandems by NiOX(:Cu)+ SAM hole-transporting bi-layers. Solar Energy Mater. Solar Cells 254, 112248 (2023).
Liu, S. et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 632, 536–542 (2024).
Tang, L. et al. All-round passivation strategy yield flexible perovskite/CuInGaSe2 tandem solar cells with efficiency exceeding 26.5%. Adv. Mater. 36, 2402480 (2024).
Zhang, Y. et al. Reduction of nonradiative recombination at perovskite/C60 interface in inverted perovskite solar cells. Adv. Mater. 37, 2500501 (2025).
Kong, T., Chen, W., Zhao, Z., Liu, Y. & Bi, D. Catechol-functionalized self-assembled monolayer for highly efficient Sn–Pb and all-perovskite tandem solar cells. Adv. Mater. 38, e17139 (2025).
Ma, C. et al. Photovoltaically top-performing perovskite crystal facets. Joule 6, 2626–2643 (2022).
Wang, H. et al. Pre-annealing treatment for high-efficiency perovskite solar cells via sequential deposition. Joule 6, 2869–2884 (2022).
Zhao, L. et al. Chemical polishing of perovskite surface enhances photovoltaic performances. J. Am. Chem. Soc. 144, 1700–1708 (2022).
Blume, R. et al. Structural and chemical properties of NiOX thin films: oxygen vacancy formation in O2 atmosphere. ChemPhysChem 24, e202300231 (2023).
He, J. et al. Improved anchoring of self-assembled monolayer on hydroxylated NiOX film surface for efficient and stable inverted perovskite solar cells. Adv. Funct. Mater. 35, 2413104 (2025).
Yu, S. et al. Homogenized NiOX nanoparticles for improved hole transport in inverted perovskite solar cells. Science 382, 1399–1404 (2023).
Li, Z. et al. Stabilized hole-selective layer for high-performance inverted pin perovskite solar cells. Science 382, 284–289 (2023).
Peng, Y. et al. Enlarging moment and regulating orientation of buried interfacial dipole for efficient inverted perovskite solar cells. Nat. Commun. 16, 1252 (2025).
Yang, F. et al. Minimizing interfacial recombination in 1.8 eV triple-halide perovskites for 27.5% efficient all-perovskite tandems. Adv. Mater. 36, 2307743 (2024).
Chen, H. et al. Regulating surface potential maximizes voltage in all-perovskite tandems. Nature 613, 676–681 (2023).
Si, H. et al. Emerging conductive atomic force microscopy for metal halide perovskite materials and solar cells. Adv. Energy Mater. 10, 1903922 (2020).
Velilla, E., Jaramillo, F. & Mora-Seró, I. High-throughput analysis of the ideality factor to evaluate the outdoor performance of perovskite solar minimodules. Nat. Energy 6, 54–62 (2021).
Ahn, N. et al. Trapped charge-driven degradation of perovskite solar cells. Nat. Commun. 7, 13422 (2016).
Al-Ashouri, A. et al. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction. Science 370, 1300–1309 (2020).
Ruiz-Preciado, M. A. et al. Monolithic two-terminal perovskite/CIS tandem solar cells with efficiency approaching 25%. ACS Energy Lett. 7, 2273–2281 (2022).
Zheng, J. et al. Efficient flexible monolithic perovskite-CIGS tandem solar cell on conductive steel substrate. ACS Energy Lett. 9, 1545–1547 (2024).
Tian, W. et al. Inert interlayer secures flexible monolithic perovskite/CIGS tandem solar cells with efficiency beyond 21%. ACS Energy Lett. 10, 562–568 (2025).
Jeong, I. et al. Flexible and lightweight perovskite/Cu(In,Ga)Se2 tandem solar cells. Joule 9, 101794 (2025).
Best Research-Cell Efficiency Chart (NLR, 2026); https://www.nlr.gov/pv/cell-efficiency
Zhou, J. et al. Homogenizing hole-selective contacts for centimeter-square flexible perovskite/Cu(In,Ga)Se2 tandems. Sci. Adv. 11, eadz2781 (2025).
Geng, C. et al. Two-terminal perovskite/Cu(In,Ga)Se2 tandems with conformal coatings based on commercial bottom cells with >26% efficiency. Energy Environ. Sci. 18, 8907–8917 (2025).
Pei, F. et al. Perovskite/CIGS tandem solar cells with over 1000 h operational stability through interconnection stress relief. J. Am. Chem. Soc. 147, 36815–36824 (2025).
Li, W. et al. Efficient perovskite/Cu(In,Ga)Se2 tandem solar cells with a composite intermediate recombination layer. Nat. Commun. 17, 711 (2026).
Zhang, S. et al. Crystallization suppression of mixed-halide intermediates for perovskite/Cu(In,Ga)Se2 tandem solar cells with improved efficiency. Nat. Energy 11, 547–557 (2026).
Jost, M. et al. Perovskite/CIGS tandem solar cells: from certified 24.2% toward 30% and beyond. ACS Energy Lett. 7, 1298–1307 (2022).
Green, M. A. et al. Solar Cell Efficiency Tables (Version 67). Prog. Photovolt. Res. Appl. 34, 482–496 (2026).
